structural wire balustrading tie bars - SBS450 marine & rigging green wall / gardens lifting shackles

BALUSTRADING SYSTEMS

All wire terminations are manufactured from stainless steel EN10088 1.4404/1.

How to Order:

There are two types of socket available:

  • back mounting sockets are suitable for use on plate or L section or for fitting to the back of tubular or box sections.
  • surface mounting sockets can be screwed or bolted directly onto wood or masonry.

They can also be recessed into a pocket and as such are ideal for use with tubular steel section.

There are many variations of the Hi-MOD Ball system. The list below demonstrates some of these variations and the components required for each type.

System B1

  • 2 x Back-Mounting Sockets
  • 1 x Hi-MOD Swage Ball
  • 1 x Hi-MOD Threaded Ball
  • 1 x Hi-MOD Swage Adjuster + Lock Nut


Click on the component above for further details on that product.

System B2

  • 2 x Back-Mounting Sockets
  • 1 x Hi-MOD Compression Ball
  • 1 x Hi-MOD Threaded Ball
  • 1 x Hi-MOD Compression Adjuster + Lock Nut


Click on the component above for further details on that product.

System B3

  • 2 x Surface-Mounting Sockets
  • 1 x Hi-MOD Swage Ball
  • 1 x Hi-MOD Threaded Ball
  • 1 x Hi-MOD Swage Adjuster + Lock Nut


Click on the component above for further details on that product.

System B4

  • 2 x Surface-Mounting Sockets
  • 1 x Hi-MOD Compression Ball
  • 1 x Hi-MOD Threaded Ball
  • 1 x Hi-MOD Compression Adjuster + Lock Nut


Click on the component above for further details on that product.

                         

Please refer to our disclaimer regarding architectural products - Click Here


Petersen Stainless Rigging Limited, Cowen Road, Blaydon-on-Tyne, Tyne & Wear, NE21 5TW, UK
Tel: +44 (0)191 4140156 Fax: +44 (0)191 4990041
All rights reserved. Copyright Petersen Stainless Rigging Limited 2007

Last Updated On 01 October 2007