Components

Individual component parts are available for purchase giving you maximum flexibility. As we do all of our manufacturing in-house we have the ability to design and make specific parts to customer requirements out a wide range of materials; Stainless Steels (including Duplex and Precipitation-Hardening), Aluminium Bronze, Nitronic, Aluminium and Titanium. We can provide parts with a wide range of specialised coatings for specific applications including anodizing, PVD, galvanizing and Xylan (Teflon). For special components that you cannot see listed please contact one of our sales staff.

NOTE: Throughout this catalogue we use the following convention – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.

<< Back to Marine Product Categories