Shroud Mast Terminals

Shroud Mast Termainal Shroud Mast Termainal Technical Drawing
Product Code Wire (mm) T (mm) B (mm) W (mm) SD (mm) HW (mm)
SH03 3 6.3 39 3.4 6.3 12
SH04 4 7.5 45 4.4 7.5 16
SH05 5 9.1 52 5.4 9.1 19
SH06 6 12.5 64 6.5 12.5 22
SH07 7 14.3 70 7.5 14.3 28
SH08 8 16.0 80 8.5 16.0 30
SH10 10 17.8 100 10.6 18.0 32
SH12 12 21.4 132 12.8 21.4 38

Product Features

316 Shroud Terminals (also known as spoon terminals) from Petersen are exclusively manufactured at the Petersen factory in England. Forged from low carbon stainless steel 316L (1.4404) every Petersen Swage Shroud Terminal is increadibly strong and light. All Petersen shroud terminals are compatible with Gibb / Navtec 840 series backing plates and are a direct replacement for Noresman Navtec 841 shroud terminals. Petersen has been a manufacturer of A4 stainless shroud terminals for many years and during that time has built an industry leading quality system with full material traceability. Petersen shroud terminals can be used with many different wire-rope constructions and spiral strand. As a manufacturer of swage spoon terminals Petersen can offer you an affordable, customised shroud terminal to suit your rigging project.

<< Back to Swage Fittings