Stud RH & LH with Imperial Threads

Machined from solid bar, skimmed from a larger size to remove surface defects.

Replace # with C for closed body Style or O for open style. Suffix R or L for Right or left hand thread.
Product Code	Wire (mm)	TH (″ unf)	D (mm)	B (mm)	L (mm)	CT (mm)	OT (mm)	A/F (mm)	Nominal Weight (g)
S#1/4x025	2.9	1/4	6.3	39	97	49	45	5	24
S#1/4x3	3	1/4	6.3	39	97	47	42	5	24
S#1/4x3	4	1/4	7.5	45	104	47	42	5	30
S#5/16x4	4	5/16	7.5	45	113	54	49	6	36
S#5/16x5	5	5/16	9.1	52	123	54	49	6	51
S#3/8x5	5	3/8	9.1	52	135	68	63	8	60
S#3/8x6	6	3/8	12.5	64	149	68	63	8	85
S#7/16x6	6	7/16	12.5	64	154	75	68	11	108
S#7/16x7	7	7/16	14.3	70	161	75	68	11	130
S#1/2x8	8	1/2	16.0	80	190	90	83	14	196
S#5/8x10	10	5/8	18.0	100	223	100	93	16	306
S#3/4x12	12	3/4	21.4	132	277	120	111	19	550
S#7/8x14	14	7/8	25.0	156	325	140	130	22	874
S#1x16	16	1	28.2	176	369	160	150	25	1275
S#11/8x19	19	1 1/8	34.5	210	425	180	168	28	2050
S#11/4x22	22	1 1/4	40.3	242	482	200	188	32	3200
S#13/8x26	26	1 3/8	45.9	290	557	220	208	36	4000

Download PDF

Enquire about this item

Product Features

316 Swage Studs from Petersen are exclusively manufactured at the Petersen factory in England. Machined from low carbon stainless steel 316L (1.4404) every Petersen Marine Swage Stud is increadibly strong. Petersen has been a manufacturer of A4 stainless Swage Studs for many years and during that time has built an industry leading quality system with full material traceability. Petersen swage studs can be used with many different wire-rope constructions and spiral strand. As a manufacturer of marine swage studs Petersen can offer you an affordable, customised swage stud to suit your rigging project.

<< Back to Swage Fittings