Stainless Steel Rigging Toggles

Our strap toggles are bent from high quality 316L stainless plates with the same degree of care as our stainless steel lifting shackles, resulting in a reliable and consistent product. Bar toggles are machined from high quality European made 316L bar. All toggles are finished with a mirror polish finish.

NOTE: Throughout this website we use the following convention – the pin size is the smallest diameter hole that our pin will fit into, the hole size is the largest diameter pin that will fit in the hole. For example, if we list a pin as being 12mm then the pin will fit into a 12mm diameter hole and conversely if we list a hole as being 16mm then a 16mm diameter pin will fit in the hole. If in doubt please ask.