Wire Rigging Insulators

Wire Rigging Insulators Wire Rigging Insulators Technical Drawing

The product codes for rigging insulators are made up by suffixing “RI” with the relevant fittings followed by the wire size, for example, the above diagram would be coded RICC06. All insulators can be swaged using most types of swaging machines. WireTeknik machines require a special pulling tool, see the table below for the correct puller code.

Larger sizes avaliable. Please contact us for details.
Wire Size (mm) Pin Size (mm) Hole Size (mm) C-L (mm) E-L (mm) S-L (mm) F-L (mm) T-L (mm) Puller Code
5 11 11.1 106 107 101 121 147 RIP7/16
6 11 11.1 110 107 101 121 147 RIP7/16
7 12.7 12.7 131 129 120 142 169 RIP1/2
8 14 14.28 153 151 140 164 212 RIP5/8
10 16 16.2 159 155 142 176 212 RIP5/8
12 19 19.05 192 180 168 207 258 RIP3/4
14 22 22.2 222 207 196 238 297 RIP7/8
16 25 25.4 258 237 226 271 337 RIP1
Larger sizes avaliable please contact us for details
C-L E-L S-L F-L T-L
Code: C Code: E Code: S Code: F Code: L
C-L Technical Drawing E-L Technical Drawing S-L Technical Drawing F-L Technical Drawing T-L Technical Drawing
Compression End Eye End Swage Stud End Fork End Toggle End

<< Back to Insulators